Reviewing Lucas Fuel Injector Cleaners

Oct 2, 2015

It is said, that the value of a machine depreciates with time. It is indeed a universal truth and is as true as the sun. But there is always something we can do to protect our machine. It will obviously degrade in performance with time but when the maintenance is good, the rate of degradation is very slow. Take the example of a car engine. It is subject to wear and tear all the time. Especially the fuel tank is the worst affected area of the car. With time, carbon deposits are all over the base and hence there is a reduction in performance with time.

In this regard, many people use many cleansing agents for their car engine and fuel tank but there is nothing as special as Lucas fuel injector cleaner. Every cleanser has its own set of features and Lucas too has something distinct of its own.

The brilliance of this type of cleanser is that it does not involve any kind of solvents. This is in a way a very good feature. Sometimes we avail certain solvent oriented cleaner who leave a poor effect on our pipelines and regulators. This is because they have certain corrosive reagents which leave stray effects on delicate parts like pipes. They cannot withstand such effect.

The second advantage is the awesome cleansing ratio of 1:400. That is, for one gallon of the fuel cleaner, we can treat as much as 400 gallons of fuel. On an average the fuel tanks can hold 14-15 gallons thus you can have fill ups up to as many as 27-30 times. Last, but never the least, it is effective both in gasoline engines as well as diesel engines. Thus you can be assured of the best end results on your diesel engine as it leaves on ordinary gasoline engines. In a way, an economical approach nonetheless.

Lucas fuel injectors do not end its duty by cleaning only. It extends its effectiveness to lubricating as well. After application, you yourself can experience a nice fuel flow and hence if you are to make a choice among cleansing agents, this is simply a must buy. Just apply it to your fuel tank and see the superb effect yourself while you are enjoying a long drive.

Continue Reading →

When you should use diesel fuel injectors

Aug 6, 2015

There are two major types of engines that you are going to run into in the automotive world. It’s a matter of gasoline options. Even though you may think that the difference here is just automatic or standard transmissions, you’d be wrong. The main issue here is in regards to fuel. There are two major fuel sources that run in cars today. You have the diesel engine and the gasoline engine. These two engines make for a great deal of difference, and can allow you to see several benefits. As a result, you may ask yourself when you should utilize diesel fuel injectors versus others. There are several advantages.

The Old Option

Diesel options in the past have been noted as being somewhat inefficient and dirty. The amount of emissions in older solutions can cause you to lose out on a smog check in certain states. The older engines, although worthwhile, have fuel injectors that you can change things up. The fuel injector here needs lubrication, and even additives if it’s older than 15 to 20 years old. The older injectors can break down, and cause trouble when accelerating and more.

The New Options

There is a new option in regards to fuel injectors, and that’s what is being touted as “clean diesel”. These engines are more efficient, have high miles per gallon, and can cost a bit more than a gasoline engine of the same style. It’s something that can be debatable as far as performance, as there are some that swear by this new option in light of gasoline costs. The cost of fuel rises, and yet diesel stays somewhat stagnant, so people often think that one is better than the other. In terms of “clean” fuel, however, this new diesel engine solution is definitely efficient.

When To Use Additives

For those that are looking at when it’s important to use diesel fuel injectors, the thing is in regards to engine type. You either have a gasoline engine or you have a diesel engine. You cannot put the other’s fuel type into your car if you have a specific model, these are not interchangeable. As such, you will need to look into additives from time to time. Additives can help lubricate and clear up debris at the injection site. That means that the fuel will push you through the car. The vehicle will accelerate with gusto if clean, and will idle a bit without it.

Overall, you will need to look into the type of engine you have. Modern diesel engines are on par with a lot of gasoline types. However, they have to be in tune with the parameters of “clean” diesel solutions. Otherwise, you’re going to lean heavily on gasoline. Gasoline engines are still the most common, even with additives that you put into place. It’s best to look at the performance that you want out of your car, and perhaps even consult a professional to move forward here. Making sure that you are doing the right thing with your car is important, so ask a mechanic that works with diesel to ensure you get the right additives or injectors installed properly.

Continue Reading →

The most important uses of a multimeter

Jun 9, 2015

Every job has tools that are required for the trade. This includes electrical work. One of the most important tools that an electrician has is that of a multimeter. This is a tester of sorts, and it look into finding electricity and measuring the power. It is sometimes referred to as a Volt-Ohm meter. Without this, touching wires could cause deathly consequences. You don’t need to be an electrician to have one or to use one. You simply need to know some of the more important uses and how to use it properly. If you’re curious about getting one for your home, start with the lower end options, and work your way up. The following are some of the things that you can use this type of equipment for.

Testing Voltage on a Battery

You have a lot of batteries lying around, how do you know which ones are dead and which ones aren’t? You could try to put them on your tongue, but do you really want the shock? (It’s recommended NOT to do that) Instead, use this simple device to test the current, voltage, and more. You will find that a dead battery will not give you much of anything, but a new one will. This is an easy science project to do with kids, and show them how to use this. You can also test batteries that are rechargeable, and even LiPO batteries.

Measuring Power Supply

When repairing circuit boards, or working with computer parts, you could test various pieces with one of these. For instance, you could measure the voltage that is coming through within the power supply that you have in place. You’ll find that this can be helpful in building and calibrating parts for a computer system. You could also test the nodes, and different parts of any circuit. This will give you a glimpse as to what you need to work on, or whether a circuit board is dead on arrival. It gives valuable information as to what’s going on.

Power Measurements In The Home

Another use of multimeters is to test for voltage in a home. The higher end models that professionals use test current, voltage, and resistance in homes. This is usually done after the power has been turned off to ensure that everything is indeed off and not running. Furthermore, they can test for any issues with the grid, outlets and more. Without testing the wiring, circuits, and different power sources, a home could end up with a serious problem. Electrical problems need repair right away, or sparks may fly.

The aforementioned are just a few of the more important uses of a multimeter. There are several other uses as well, however they are likened to professional electrical work. The average consumer is not going to be using one of these to do anything extreme. However, they can be used to troubleshoot issues, look for problem areas, and test current as well. It’s a great tool to have in the home, office, or in the garage. However, it’s also important to understand how to use it properly.

Continue Reading →


Author